The Federal Aviation Administration has paused the installation of new routers linked to last week’s nationwide ground stop, after a single device in Arkansas flooded the air traffic control network and grounded flights across the United States.
Key Points
- FAA router ground stop — the FAA said on Tuesday it was immediately pausing deployment of additional Juniper routers pending further testing, after the nationwide ground stop on Friday 13 November.
- The ground stop lasted nearly five hours, the longest since the September 11 attacks, and led to the cancellation of more than 18,000 flights.
- A router installed by contractor L3Harris at a communications site in El Dorado, Arkansas, flooded the system with 1,000 connection attempts every four to five seconds.
- The root cause is still unknown, and the affected routers are being tested at an L3Harris laboratory in Florida under FAA supervision.

The failure began when L3Harris, the contractor that maintains the FAA’s telecommunications network, was replacing ageing copper wiring with fibre-optic lines as part of a modernisation programme. The newly installed Juniper router at the remote El Dorado site overloaded a key government communications system, destabilising aircraft communications and radar feeds at 17 of the 22 regional air traffic control centres. The FAA said on Sunday that the data overload could have happened at two locations — the El Dorado site and a radar facility in Amarillo, Texas — and that L3Harris ultimately blocked both, stabilising the network.
Transportation Secretary Sean Duffy said on Monday that investigators had been able to recreate what happened in El Dorado but still had no clarity on the root cause. “We’ve been able to recreate what happened in El Dorado, but the root cause of what happened, we don’t have clarity yet,” he said. Duffy said investigators were examining whether the disruption resulted from faulty equipment, installation problems or incorrect configuration. The FAA said there was no indication that a cyberattack caused the incident, and FAA head Bryan Bedford said speculation that artificial intelligence was involved was unfounded.
A system running on 25-year-old equipment
For now, the FAA is relying on older Cisco routers that have been in place for 25 years while the investigation continues. The agency has disabled the broadcasting function on the new Juniper routers already installed and on more than 60 other Juniper routers operating within its network. The copper-to-fibre transition involves converting 3,648 routers to Juniper devices; to date, about 400 have been installed and 69 are operational.
The pause comes amid growing scrutiny of the nation’s air traffic control system. A group of 13 Democratic senators has called on the FAA to suspend further router replacements until investigators determine what caused the disruption, and the Trump administration is making a new request for $50 billion to improve air travel. The FAA lifted the nationwide ground stop on Friday evening after confirming its communications network had stabilised, but the episode — which disrupted the travel plans of hundreds of thousands of passengers — has left the modernisation programme itself under question.
For background on the original disruption, see our report on the FAA lifting the nationwide ground stop after a telecom outage, and on a fibre-optic severance triggering aviation gridlock. More in our US News section.
Sources: Associated Press via WPTF, “FAA temporarily stops router installations connected to air travel stoppage” (https://www.wptf.com/2026/11/17/faa-temporarily-stops-router-installations-connected-to-air-travel-stoppage/); Reuters via Northland News Radio, “FAA pauses Juniper router deployment after grounding US flights” (https://northlandnewsradio.com/2026/11/17/us-senators-urge-faa-to-pause-new-router-deployment-pending-testing/).
